不同变质程度煤的高分辨率透射电镜分析

利用高分辨率透射电子显微镜(HRTEM)分析了三种不同变质程度煤样的结构特征。基于傅里叶-反傅里叶变换方法,并结合Matlab、Arcgis和Auto CAD软件,通过图像分析技术,获得了HRTEM照片的晶格条纹参数。结果表明,三种煤样的晶格条纹呈现不同特征,按条纹长度分别归属于1×1-8×8共计八个类型。以3×3为临界点,在1×1和2×2中,ML-8中芳香层片的比例高于DP-4和XM-3;在3×3-8×8中,ML-8中芳香层片的比例低于DP-4和XM-3。对比HRTEM和XRD参数d002发现,随着镜质组反射率的增加d002都呈现递减趋势。     

Where the rubber meets the hand: Unlocking the sensing potential of dielectric elastomers

Practice makes perfect to some extent. Research has shown that musicians who practice the piano for long periods of time can suffer a range of hand problems from loss of control to diminished speed. Now imagine a rubber keyboard that is springy, soft, and elastic. This is the new type of input device that dielectric elastomers (DE) can create. However their usage in large sensing systems is limited by a scalability challenge. Each DE sensor is married to a pair of connection cables and electronics, adding to the complexity of the background overheads. A new efficient multi‐frequency method is presented that is capable of detecting internal pressure changes from a difference in the DE's capacitance without the need for any additional wires or connections. This effectively segments the DE into smaller sections, achieving information from a single sensor equivalent to multiple sensors. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 465–472     

Research and Evaluation on Wear in Power-Shift Steering Transmission Through Oil Spectral Analysis with RKPCA Method

The most common methodology used in element concentration measurement and analyzing of wear particles is Atomic emission (AE) spectroscopy .The present paper presents an evaluation method on wear in po...     

Phosphoric-Acid Retention in High-Temperature Proton-Exchange Membranes

Great efforts have been conducted to develop high temperature proton exchange membrane fuel cell (HT-PEMFC) due to its features of enhanced electrocatalyst reactivity, simplified hydrothermal management system and high CO tolerance of catalysts, and remarkable progress has been achieved. However, the easy leaching of phosphoric acid (PA) from the membranes during operation limits its commercial scale-up in complicated environments. This concept here mainly focuses on the recent developments for mitigation of PA loss in PEMs. The probable mechanisms of PA loss are proposed. The approaches to improve PA retention for example via introduction of phosphonic acid by covalent bond, using ion-pairs interaction and siphoning effect, and blending with inorganic nanoparticles are described in detail. Among these strategies, the siphoning effect from the intrinsic microporous PEMs is the most efficient and enables the cell to operate flexibly within a broad temperature range. Therefore, this concept may provide new ideas for the scientists to retain PA, to improve the cell performance and expand the potential applications of PA doped PEMs at elevated humidity and wide temperature range.     

采用组合引导磁场的多注二极管设计

分析了采用单一同轴磁场时强流相对论多注阴极的侧端发射问题,研究了在不同磁场内半径和多注漂移管长度情况下多注电子束的传输效率。研究发现:由于引导磁场尺寸有限,高压下多注阴极杆及多注阴极柱的电子束发射是影响多注电子束传输效率的主要因素,且该部分电子束对多注漂移管入口管壁的轰击直接影响了多注速调管的重频能力。设计了采用永磁铁和同轴磁场组合工作的强流相对论多注二极管,理论分析和模拟计算证明:基于组合磁场的多注二极管可明显减弱甚至抑制多注阴极发射球头以外的电子束发射,并且组合磁场的磁场位形和强度可满足强流相对论多注电子束的高效、稳定传输。     

Engineering nanostructures of CuO-based photocatalysts for water treatment: Current progress and future challenges

Nowadays, increasing extortions regarding environmental problems and energy scarcity have stuck the development and endurance of human society. The issue of inorganic and organic pollutants that exist in water from agricultural, domestic, and industrial activities has directed the development of advanced technologies to address the challenges of water scarcity efficiently. To solve this major issue, various scientists and researchers are looking for novel and effective technologies that can efficiently remove pollutants from wastewater. Nanoscale metal oxide materials have been proposed due to their distinctive size, physical and chemical properties along with promising applications. Cupric Oxide (CuO) is one of the most commonly used benchmark photocatalysts in photodegradation owing to the fact that they are cost-effective, non-toxic, and more efficient in absorption across a significant fraction of solar spectrum. In this review, we have summarized synthetic strategies of CuO fabrication, modification methods with applications for water treatment purposes. Moreover, an elaborative discussion on feasible strategies includes; binary and ternary heterojunction formation, Z-scheme based photocatalytic system, incorporation of rare earth/transition metal ions as dopants, and carbonaceous materials serving as a support system. The mechanistic insight inferring photo-induced charge separation and transfer, the functional reactive radical species involved in a photocatalytic reaction, have been successfully featured and examined. Finally, a conclusive remark regarding current studies and unresolved challenges related to CuO are put forth for future perspectives.     

Broadband high-efficiency controllable asymmetric propagation by pentamode acoustic metasurface

We utilise the pentamode metasurface to realise broadband high-efficiency and controllable asymmetric transmission. The designed metasurface can manipulate the acoustic waves, as expected from the generalised Snell's law, and exhibits unique characteristics such as extraordinary broadband acoustic control, apparent negative refraction, and conversion from the propagating wave to surface mode. The asymmetric transmission features of positive refraction for the forward incidence (FI) and negative refraction for the reverse incidence (RI) can be realised within the range of 2600 Hz to 5600 Hz by controlling the incident angle from 0° to 35° with the transmission efficiency higher than 85.4% for the FI and RI. In addition, by further adjusting the angle of incidence in the range of 25° to 90°, asymmetric transmission characteristics can be expressed as surface wave transmission for the FI and transmitted wave transmission for the RI within the same frequency ranges.     

传输线方程的高精度龙格−库塔数值求解方法

提出了一种求解传输线方程的高精度龙格-库塔(RK)方法。此方法在空间上采取高阶泰勒展开,提高了对空间微分的近似精度,减少了数值色散所带来的误差。与传统的时域有限差分法(FDTD)方法相比,在每波长采样数相同时,RK方法的计算精度更高。同时,根据Taylor模型,对外界平面波激励源进行离散,成功利用RK方法对外部场激励传输线进行求解,扩大了龙格-库塔方法在求解传输线方程时的应用范围。通过编程对平面波辐照下无限大地平面上的单导体与双导体的算例分别应用FDTD方法与RK方法进行了计算,验证了RK方法的正确性。结果表明同等计算条件下RK方法的计算精度更高。     

梁柱简化模型在自立塔塔线体系动态响应中的适用性研究

对输电塔进行合理简化可以提高塔线体系动力学仿真的效率。本文给出自立塔梁柱简化模型的计算方法，并提出利用梁柱简化模型计算方法建立自立塔塔线体系整体模型，同时采用桁梁混合模型建立精细化塔线体系整体模型，对两种模型塔线体系静力特性及振型和固有频率等动力特性进行对比分析。以脱冰工况为例，采用生死单元技术将施加在输电线节点上的集中质量单元杀死来模拟脱冰，实现对塔线体系动力学响应的有限元模拟，研究塔线体系简化模型在动态响应中的适用性。结果表明，两种模型弯曲变形误差小，低阶的振型相同，固有频率值误差小，动力特性基本相同；脱冰工况下，自立塔节点位移和塔材内力时程曲线一致，在提高计算效率的情况下，能有效保证计算精度。     

Transmission of macroeconomic shocks to risk parameters: Their uses in stress testing

In this paper, we are interested in evaluating the resilience of financial portfolios under extreme economic conditions. Therefore, we use empirical measures to characterize the transmission process of macroeconomic shocks to risk parameters. We propose the use of an extensive family of models, called General Transfer Function Models, which condense well the characteristics of the transmission described by the impact measures. The procedure for estimating the parameters of these models is described employing the Bayesian approach and using the prior information provided by the impact measures. In addition, we illustrate the use of the estimated models from the credit risk data of a portfolio.